LatestVersion: 0.50a | Community: 0.70a
 Deutsch English Français Hebrew Chinese Traditional Spanish Italian Polish Lithuanian Estonian Danish Swedish Dutch (Netherlands) Portuguese (Brazil) Czech Portuguese - Portuga Russian Catalan Turkish Finnish Romanian Greek Serbian Chinese Simplified 




Get eMule at SourceForge.net. Fast, secure and Free Open Source software downloads
US Robotics Model #8000-02 HelpNAV

US Robotics Model #8000-02

1. Open your Router Configuration-Page via Web Browser and log in..
2. Navigate to "Virtual Server" :



3.Enter the eMule Ports 4662 and 4672 into the Service Ports column.
The Webservice-Port 4711 is NOT essential for getting High-ID !
If you are using different eMule Ports,then change them into the right values.In eMule-Settings "Connection" you can check which Ports you are using.
4. Assign each port to the IP address of the computer you run eMule on (assuming you have a static IP address) and click "Enable" for each of them.
How could you find out your own IP? Klick onto Start » Execute » "cmd.exe" and klick OK.
Type the Command "ipconfig" into the Commandline, this will show your IP.
5. Den Haken bei "Enable" setzen,damit diese Weiterleitung aktiv wird.
6. Press "Save", then "Reboot".
7. Connect to an eMule-Server and be glad of High-ID ;-)

thx to Ricus


Translate this page Last Update: 20.08.2005 14:51
The GUI
The Preferences
FAQ
General Information
Ports, Firewalls & Router
 
Firewalls
Routers
 
  General
Solwise SAR-7x5 + Allnet ALL129
Lucent CellPipe 20A-GX-E
SMC Barricade 7004
Linksys BEFSR41
Cisco 677/678
US Robotics Model #8000-02
  Ports
Servers
Features
Troubleshooting
User Made Guides and FAQs
  Beginner's Guide
Network Guide


Privacy Policy